 | |
 |
Produktinfos |
 |
|
ISP programming interface - serial (RS232) - New: now supports ATMega2561 | Standard programming interface for RS232-interface. Is being needed for programming Atmel microcontrollers (thus our modules D04x, D06x, D07x
| Item No.: | E-H003b | | Weight: | 0,05 kg | | Stock: |  Available |
|  |
|
|
 |
|
 |
 |
 Build with SMD components this ISP programing adapter is beeing used to send your compiled program from your PC (serial port / RS232) to the mikrocontroller.
This set consists of:
- RS232 ISP programming interface
- approx. 80cm (30") cable for the connection with our controller board.
Includes LEDs
These LEDS are showing the status of the current programming task
This adapter is compatible to the standard AVR910 so this dongle can be used with practically any programming software. Comment: Bascom does not support AVR910 programmer very well so you better use the interface software we are shipping on our CD (AVR Prog).
Hints:
- Programming is approx. as fast as with a parallel ISP programmer
- The programmer software buildt into Bascom does not really support this serial programming interface. Because of this we ship a another programming software. Just develop and compile with Bascom, then send the program to the controller with ours.
- This serial programming interface includes its own microcontroller. This controller knows many but not all microcontroller. Please check if your microcontroller ist included. Supported are the following controller: AT90S1200, AT90S2313, AT90S2323, AT90S2333, AT90S2343, AT90S4414
AT90S4433, AT90S4434, AT90S8515A, AT90S8534, AT90S8535, AT90S8544,AT90PWM2,AT90PWM3, AT90CAN128
ATTiny10, ATTiny12,ATTiny13,ATTiny24,ATTiny25, ATTiny15, ATTiny26, ATTiny44,ATTiny45, ATTiny84, ATTiny85, ATTiny2313
ATMega8, ATMega16, ATMega32, ATMega48, ATMega64, ATMega88, ATMega103, ATMega128, ATMega161
ATMega162, ATMega163, ATMega164,ATMega168,ATMega169, ATMega324, ATMega329, ATMega640, ATMega649,ATMega1280, ATMega1281,ATMega3290, ATMega6490, TMega8515, ATMega8535 AT89S53, AT89S825
- NEW: Now also the ATMega2560 and ATmega2561 are supported
If your controller is not shown is not supported (yet?). Then you better use the parallel programming adapter (our item E-H003a) as this is supporting ALL Atmel microcontroller.
|
 |
 |
|
 |
| | |
