Quick search
Your cart
Microcontroller+Color-TFT
µC with 2.1" TFT
µC with 1.5" TFT
Color TFT only / no µC
2.1" TFT only
1.5" TFT only
Important accessories
Programming interface
Enhancement PCBs
Housings for TFTs
Compiler
Electronics
Logic Analyzer
Soldering supplies
Components
Software only
Produktinfos

 

Large development system / add-on PCB for items D062x, D072 and D073

NEW: Development PCB for D062x / D072 / D073 for testing and developing - allows connection without soldering. Easy enhancement for your module with RS232, RS485, JTAG, ISP, CAN Bus, switches, LEDs etc., 850 soldering pads for your own usage
Item No.:E-P006
Weight:0,05 kg
Stock: Available

RS485::
CAN Bus driver:
Connectors:

 
 


 
Add to cart
Large development system / add-on PCB for items D062x, D072 and D073
logos1.jpgEnhance your Module D062x or D072 or D073 with a development system including switches, LEDs, RS232 standard connector, ISP etc.
 
Perfect for enhancing the module with your own circuits like relais, connectors etc.
 
All contacts of the module D062x and D072 and D073 are available at the enhancement board.
 
Just solder in the connector bars we ship with this item, then add the needed elements (e.g. relais, transistors) and click on the main module and you are ready. This means day by day development without soldering - just adding some wires to the connectors.
 
Of course you may use this PCB not only for development but also for a final application including ATMega, color TFT, RS232, Relais, etc.
Approx. 850 free soldering pads are available for your own usage.
 
Allows RS232 by default, RS485 and CAN-Bus are optional available (SMD chips need to be soldered in).
 
 

p006-beschriftung-en.jpg 
p006-howto.jpg
We ship:
  • two sided PCBs with through plate holes. 2,54mm (0.1") spacing, PB free, ROHS conform
  • 2 connector bars for connecting the display module
  • 2 extra connector bars for an easy connection to all ports (temporary connection without soldering - just plug in a wire)
  • ISP connector (standard framed connector)
  • JTAG connector
  • D-Sub-RS232-connector
  • 1 reset switch
  • 6 switches
  • 10 LEDs (Bar)
  • LED-resistors (net)
  • Connector for power
  • 1x10 connector for a soldering free connection of the LEDs (just push a wire into the connector)
  • optional are the six marked (*) extra connectors
  • optional are SMD items like Max485 for RS485 or the SMD CAN Bus driver plus their capacitors and resistors.
  • We ship PCB with all material (nothing soldered but SMD devices if ordered).
Size: ca.115 x 64 mm (4.5" x 2,5") - fits in our cases with clear top