|
3D visualization images from the CAD program  This elegant ABS housing provides space for an up to 157 x 53 mm large microcontroller board. The default display cut out is usable for 2.1" to 2.5" displays.
The upper and lower shell of the enclosure are angled and can be used in both directions. This allows two kinds of housings: one beeing flat at the bottom and a raising height and one with an even heigth (see photo at the bottom - both variants are possible just by turning the lower party by 180°).
The TFT display itself can be protected with an extra glass (within the scope of supply).
Our microcontroller module D071x was tailored to this housing, thus it fits perfectly into it. Also the board was designed in a way that you may use the housing with or without the optional battery compartment.
Additinally our D072 may be used in this housing, but it must be glued to the housing as there are no fitting mounting pads.
The housing is available in 2 colors: light gray or dark gray (also in a shining silver if you order at least 100 housings). Just select at the upper left side the different variants with housing color and seal color and the photo beneath with show how the selected combination looks like.
For this housing a decorative seal in the colors yellow, blue and dark gray are available (starting from 10 pieces, we can also deliver the colors red and green). This seal seals the enclosure to IP65 (waterproof) and also it gives you inside additional 2mm height. It also protects the housing against slipping on a table and against shocks or fall.
This elegant housing (with or without decorative seal) gives your devices a professional appearance.
Shortly we will also be able to deliver a keypads for this housing. The D071x module will come with the correct connector. If you like to get your individual keypad or our standard keypad with your individual printing we will be able to deliver this too.
Photo: turning the lower base by 180° changes the characteristics of the case: from a desk housing to a flat housing
Photo: Various colors and decorative seals allow an individual touch. We can also offer you standard or individual keypads. Just contact us if you are interested. We may also deliver housings with individual cutouts if you like. 
Hint: If purchase a light and a dark housing together, you may create bicolor housings (dark upper and pale lower part, or vice versa). |
