 Large 2.1" 2.1" color TFT display for your microcontrollerYou will get display only including mounted connector PCB as shown. This is an item for our customer of modules D071, D072, D073 only. With this item you will get no datasheet, no documentation, no software etc. (of course included with modules D071, D072, D073). This is a transflective TFT (very rare). Tranflective means: it is readable in regular light conditions AND in the dark AND in bright sunlight. Usual transmissive TFTs cannot be read in bright light conditions - this one can. For solutions which shall be used outdoor, a transflective TFT is a must! If you want to receive a photo which demonstrates this, please send an e-mail. Information: The 2.1" display offers an approx. 80% larger active display area than our 1.5" display. We ship:
- Display, tested, including connector PCB with integrated special connector. The PCB also includes 1x10 connector pins with 2.0 mm (0.078")spacing and the connector for your own PCB (latter not shown at the picture)
Technical data: Size TFT Display: Size over all: ca. 55.5 x 38 mm (2.18" x 1.5") Height including connector PCB: approx 8mm (0.3") Active display area: approx. 42 x 31,5 mm (1.65" x 1.24") Diagonal size or active area: 52,5 mm (2.1")
Electrical data: Voltage (Vcc): 3,0 - 3,3 Volt, only a few µA Voltage lighting: 12-14 Volt, 15 mA (minimum 11 Volt, you may use a higher voltage by changing the resistor on the connector PCB) Voltage of microcontroller signals: Vcc (3,0 - 3,3 Volt) 132x176 Pixel 65.536 colours (RGB:565)
|
