Quick search
Your cart
Microcontroller+Color-TFT
µC with 2.1" TFT
µC with 1.5" TFT
Color TFT only / no µC
2.1" TFT only
1.5" TFT only
Important accessories
Programming interface
Enhancement PCBs
Housings for TFTs
Compiler
Electronics
Logic Analyzer
Soldering supplies
Components
Software only
Produktinfos

 

2,1" color TFT display incl. mating SMD connector for own PCBs

choose this item if you like to mount the 2.1" TFT to your own PCBs
Item No.:E-X210
Weight:0,02 kg
Stock: Available


 
 


 
Add to cart
2,1 color TFT display incl. mating SMD connector for own PCBs
logos1.jpgLarge 2.1" color TFT display for your microcontroller
You will get the bare TFT display with its SMD connector INCLUDING the mating SMD connector (as seen on the PCB above) for your own PCBs.
Minimum order quantity is 10 displays!
 
This is a transflective TFT (very rare). Tranflective means: it is readable in regular light conditions AND in the dark AND in bright sunlight. Usual transmissive TFTs cannot be read in bright light conditions - this one can. For solutions which shall be used outdoor, a transflective TFT is a must! If you want to receive a photo which demonstrates this, please send an e-mail.
 
If you already purchased one of our display solutions you might want to use just the TFT display on your own PCB solutions. For this you might purchase the bare display only. As the mating SMD connector is difficult to get and very expensive (up to 5 Euro for each SMD connector), one mating SMD connector for each display is included.
 
We ship:
  • Display, tested with SMD connector.
  • mating 10 pin SMD connector (in tape for possible automatic soldering)
Technical data:
Size TFT Display:
Size over all: ca. 55.5 x 38 mm (2.18" x 1.5")
Height: approx 4.6 mm (0.18")
Height mounted (includes stacked SMD connectors - thus from PCB to top of display): 7.1 mm (0.28")
Active display area: approx. 42 x 31,5 mm (1.65" x 1.24")
Diagonal size or active area: 52,5 mm (2.1")

Electrical data:
Voltage (Vcc): 3,0 - 3,3 Volt, only a few µA
Voltage lighting: 12 Volt, 15 mA (minimum 11 Volt, you may use a higher voltage by changing the resistor on the connector PCB)
Voltage of microcontroller signals: Vcc (3,0 - 3,3 Volt)
132x176 Pixel
65.536 colours (RGB:565)
 
One of these items might be interesting for you:
        
flyer-front-small.jpgd012vorne-150.jpg
Only available for customer of one of our modules D071, D072, D073.
full solution for your existing microcontroller (e.g. PIC, ARM, AVR ...) - includes complete module with programming documentation and complete software for C and Basic. Can be used portrait and landscape...
 Pcs Add to cartDetails
 Stk Add to cartDetails
  
Matching Products: